Parksons Engineering Corporation

Typical Applications

Bending of mild steel (MS) plates in heavy fabrication and plant maintenance workshops.
Fabrication of structural parts for shipbuilding, railways, and defence applications.
Bending of brackets, trays, stiffeners, ducts, and panels used in power plants, cement plants, steel plants, and EPC projects.
Preferred in PSU and industrial plant workshops where uptime, serviceability, and long-term reliability are important.

• The Hydraulic Press Brake is a shopfloor bending machine designed for stable and repeatable forming operations.
• Rigid, welded steel frame construction suitable for structural bending loads.
• Rear-mounted hydraulic cylinders provide direct ram actuation with stable force transmission and easier maintenance access.
• Manual or motorised back gauge enables accurate positioning of workpieces for repeatable bends.
• Powerful hydraulic and electrical architecture designed for ease of servicing in plant environments.
• The design prioritises robustness, accessibility, and predictable performance over complex control systems.

Model	PB-80 × 2000	PB-125 × 2500	PB-160 × 2500	PB-200 × 3000
Pressing Capacity	80 Ton	100 Ton	160 Ton	200 Ton
Bending Length	2000 mm	2500 mm	2500 mm	3000 mm
Clear Pass (approx.)	1500 mm	2050 mm	2050 mm	2500 mm
Bending Capacity (MS)	6 × 1500 mm	8 × 2000 mm	10 × 2000 mm	10 × 2500 mm
Open Height	330 mm	330 mm	350 mm	400 mm
Ram Stroke	150 mm	150 mm	150 mm	200 mm
Throat Depth	200 mm	200 mm	300 mm	300 mm
Table Width	180 mm	180 mm	230 mm	300 mm
Main Motor	5.5 kW	7.5 kW	11 kW	15 kW

Bending capacity depends on material grade, die opening, and bend length.
Motorised back gauge is recommended where repeatability and production consistency are required.
Capacities rated based on steel of Ultimate Tensile Strength (UTS) 42 kg/mm² using standard V-dies.
Higher tonnage, longer tables, and Servo-Controlled configurations available on request.